NOVEMBER 3 VICTOR ECHO MIKE
  • Blog
  • Events and Activations
  • Diversions
  • About
  • Gallery
  • Contact
  • Links
  • Subscribe
  • Search
  • Blog
  • Events and Activations
  • Diversions
  • About
  • Gallery
  • Contact
  • Links
  • Subscribe
  • Search
NOVEMBER 3 VICTOR ECHO MIKE

ham radio Projects and musings from a (Relatively) new operator

What on Earth?!

7/6/2017

0 Comments

 
post contains affiliate link
This post is for all the campers, RVers, park-goers, and park Rangers who can't quite figure out what is going on in the park, or at that neighboring camp site. Most of my posts are written for an audience that knows exactly what I'm up to, but with this one I wanted to try and reach out to some new people. (PS - to all my usual readers, stick around - there's a fun little video at the end!)
I wanted to write this post because for every person that has stopped and asked about what I was doing, I have noticed about 3 who looked long and hard out of curiosity but walked on by. So what is it that I do, that generates all the confused looks? This:
Picture
My tent and radio mast set up at Darien Lakes State Park. For the frequency and type of camping I do, this tent is great. The picture is clickable affiliate link in case you are looking for an "instant-up" tent yourself.
The tent is pretty self explanatory - I do all the things in there that one normally does in a tent, plus one extra thing that involves that giant yellow pole (I call it a mast.) That one additional thing is Ham Radio, and the mast (giant yellow pole) is holding up some wire that I use for a portable antenna.
Do people still do that you say? The answer is yes, and lots of them! When you think of Ham Radio you might think of old guys in their basements, with huge equipment and giant towers, making small talk via 2-way radio across the globe, but there is much more to the hobby than that (and we're not all old! Some of us are teenagers, and some of us are dads in our 30's with only the beginnings of a bald spot😱) The easiest way to understand what Ham Radio is, and how extensive it can be, would be by comparing it to something else, so I'll give you two examples:
Picture
We might compare it to the hobby of "Hunting" because within the hobby there are people that do archery, people that use rifles, people that are into muzzle-loading, and some that are into trapping.

Picture
Additionally, we might also compare it to "Camping" as a hobby, because within camping, some people are into car-camping, some are into RVing, some are into back-country, and some are into over-landing.

If you have any familiarity with the depths that these other hobbies can go to, you also have a basic understanding of what Ham Radio can be. Rather than tell you about all the corners of Ham Radio that obtaining a license opens up for you, I just wanted to introduce you to the one you might come across in State and National Parks, on Mountains, and even on some remote Islands - Portable Operating!
Portable operating is just what it sounds like - we take small (relatively) equipment out with us, and set up. The folks doing the portable set-up are often called activators because we are "activating" or "putting on the air" a park, a mountain summit, an island, or some similar location. Other people who are at home then try to contact those of us who have set up our portable operation so that they can "collect" those parks/islands/mountains as places they have contacted. We usually call these folks "chasers". On any given day you might be either one, or even both at the same time!

To take this a step forward, we have created our own "awards" programs (they're just for fun - mostly😜) and when we do an activation we send our logs (the list of people we contacted) to the group that organizes the programs (there are several.) Our logs get dumped into a database, compared for some basic validation, and then we can get fancy awards, like our name on a website, or a pretty certificate to hang on the wall (remember, it's just for fun and bragging rights!)
Picture
Picture
The portable operating I do most often is part of an international program called "World Wide Flora and Fauna" which focuses on operating from a specific list of natural spaces. The places on the list for the US devision of the program are mostly state and national parks, so we often refer to it as "Parks on the Air." So the next time you see someone setting up an odd campsite, like you can see me doing in the short video below, stop by and say hi! Most of us love to chat, and if you are curious most of us are even willing to put you on the air so that you can try and make some contacts yourself (we call that 3rd party traffic, and we can help you do that as long as you have us helping as your "control operator".)
If you're at all curious about ham radio, a great place to start is the American Radio Relay League Website.  If you're into any type of outdoor activity, ham radio is an awesome compliment to that.  Not sure how?  Drop me a line and we can chat more!
0 Comments

More Antenna Stuff From Junk

6/23/2017

2 Comments

 
In preparation for my KFF (the US division of WWFF) activation in Darien Lakes State Park I wanted a better way to support my Mast-From-Junk while I extended it and staked the guys. I had a basic idea of something many of us have seen before in my head, but rather then shell out my hard-earned cash I decided to "shop" in the scrap bins in my garage and basement.

​In photo-journal style, here's what I came up with:
Picture
One of the few pieces I had to buy - a drain designed to fit 2" DVW pipe.
Picture
Removed the drain cover and drilled some holes.
Picture
Measured out a location onto a scrap of 3/4 inch plywood
Picture
Marked the location of the holes.
Picture
More drilling
Picture
Another purchased item - some T nuts - getting hammered into place
Picture
Gluing up the drain and some PVC parts (all 2" DVW pipe and fittings)
Picture
Test fit - lookin' good!
Picture
Fished one of the cans of clear-coat out of the stash of spray paint
Picture
Sprayed it on fairly thick - 4 coats
Picture
Screwed the PVC parts back on, and clamped it in place to dry for 24 hours.
Picture
Presto - a tube on a peice of plywood.
Picture
The top threads off, so that I can store these things inside.
Picture
These "things" are stakes with a 90 degree top, purchased from the big blue store.
Picture
6 of them around the perimeter do the trick...
Picture
And just like that, a mount to hold my mast while I set it up, and a platform to sit things on so they don't get lost in the grass.
Picture
Oh, and I can do this with it too. How convenient!
Picture
And by way of example, here it is, deployed during my Darien Lakes State Park WWFF-KFF activation!

So there you have it - probably less then 2 hours of work, and about $10 spent. Your cost may vary depending on what junk you have available. If you're a metal worker you could probably make something longer-lasting with your scraps, but with the thick clear-coat on the wood, I should get a lot of mileage out of this!
Back to Part 3
Back to Part 1
2 Comments

Topping It Off

6/17/2017

0 Comments

 
Did you ever have a project with that one little detail you just didn't get around to? In ham radio, sometimes I think that it is required that you always have at least one unfinished project at any given time!
For me, one of those projects is my Mast-From-Junk (if you want to read about this project from start to current, go back to part 1.) When I made this, I put an end on it that had painters-pole thread, so that I could easily attach things at the top.
Picture
The top of my "Mast-From-Junk" showing the painters pole thread I put at the top of it.

While this was a great idea, it went until now before I got anything that could actually be used on this! My intention all along was to make this work with my Buddipole parts, so I finally ordered the adapter they sell to attach their components to this type of thread.
Picture
The Buddipole painters-pole adapter. This threads onto painters-pole thread and then accepts the Buddipole "versaTee"

Strange how time can slip away during the busyness of life, and make it take 5 months to get around to ordering a $6 part! Now that I finally have it, my mast feels much more complete, and I have a whole additional range of antenna tricks available to me on my portable operations!
Picture
Picture
Back to Part 2
Continue to Part 4
Back to Part 1
0 Comments

You've Got Mail

6/16/2017

0 Comments

 
Post Contains Affiliate Links
     Ah yes, 90's nostalgia.  I miss the sound of my 14.4k modem dialing out over my land-line, and that melodic voice announcing my messages when I finish logging on....
     Anyway, I didn't even intend to write about that kind of mail, I'm writing about snail-mail, because mine was awesome yesterday!
Picture

Here's what I got, for those of you that can't see the picture:
  • July Issue of QST Magazine - I always love getting this magazine, and this month's issue has a review in it written by a fellow portable operator / activator, Stewart - KB1HQS, who, as far as we know, is the only person to activate more NPOTA units in a single day (13) than I did (11) during the 2016 event!
  • Motorola Hand Mic - If you follow me on twitter (if you don't, please do!), you might have realized that I recently helped to acquired a GR1255 repeater. I got this hand mic to use with it, so that folks can TX directly from the repeater when they're near it, instead of needing to use a separate radio.  This repeater came directly from it's prior owner, but you can usually find them on e-bay, since they're not much use in the commercial world any longer, since Motorola has stopped supporting them.
  • Ham Radio 360 Antenna Analyzer Board - I'm a fan of the Ham Radio 360 show for many reasons, but one of them is the "Workbench" series that they do every other week.  The first project they discussed was building this antenna analyzer, which was designed by K6BEZ. Life has been busy, and I just hadn't gotten around to ordering one.  I happened to catch on the most recent episode of the podcast that once they sell out of the current stock, they won't be re-stocking until the next re-design, so I finally pounced.  I'll be sure to share my experience building it once I finally do, but if you check out the site at the link above, lots of other people have been sharing their experience, tips, tricks, and upgrades.
     Getting mail is exciting whenever it isn't bills or junk, but it's even more exciting when it's all radio stuff!
0 Comments

Manage Your Guys

6/14/2017

5 Comments

 
Post Contains Affiliate Link
     No, I don't mean manage your guys as in coach your baseball team. I mean manage your guys as in keep your antenna mast supports organized.
     A few months ago I wrote about my "Mast From Junk" which I made primarily from an extending pole that was bound for the trash.  I have used the mast several times now - on Winter Field Day 2017 (You can check out myshort YouTube video to see some shots of it in action) and on a couple of other portable operations.  The last time I used it I had to pack up in a hurry because I started to get rained on.  I tried to be organized about it, but I admit to not being as careful as I should.
     Since I am planning on using this mast during my WWFF Activation of Darien Lakes State Park next week, I pulled it out of the corner of the garage.  After an hour of working, my guy ropes still looked like this:
Picture

     Why am I sharing my horrible mess that I brought on myself?  Because this is how we learn!  Sometimes in ham radio we feel like we should know everything just because we passed a test.  The truth is, whether you learned something by reading, or by other people telling you, sometimes it just doesn't sink in until you experience it yourself.  This is the case even if it is something simple like organization, or something more challenging, like graphing complex impedance.  I've read about methods for neatly wrapping rope and cable, I've seen the little plastic kite winders that some people use, I've even seen ways to support masts without guy ropes at all, but I just didn't get around to any of these!  Now I'm paying for it, but I learned a valuable lesson first hand - take the time to neatly pack your gear!
     So, pardon me while I dust off my pride, and go back to my mess of rope in the garage.  For now I'm going to re-wrap this with the "over-under" method that someone in one of the ham radio Face Book groups recommended (Google it, you should be able to find a tutorial.)  While I do that, I'll be brainstorming some type of device to wrap my rope around - simply buying something isn't my style, so I'll let everyone know what I come up with using the scraps of stuff I have in my garage...
Bye for now!

P.S.  Those things on the end of my guy ropes are actually clothesline tensioners.  They work great for quick adjustments and keeping guys tight in portable setups! 
Affiliate Link
5 Comments
<<Previous
Forward>>

    Categories

    All
    Antenna
    Cw
    Digital-modes
    Flying-with-gear
    Home QTH
    Miscellaneous
    Mobile
    Operating Events
    Portable
    POTA
    Shack Build
    Technical


    - N3VEM -

         Welcome to my Ham Radio Blog!  This blog was started primarily to share my two concurrent shack builds - my mobile station and my home station.  Over time, this has grown to include sharing about my operations, and general radio-related thoughts that I have as a newer operator.  
         
    ​Enjoy!

    RSS Feed


    Picture
    POTA!

    Picture
    Proving that hams do indeed still build stuff!

    Picture
    100 Watts and Wire is an awesome community, based around an excellent podcast. 

    Archives

    September 2020
    July 2020
    January 2020
    September 2019
    August 2019
    July 2019
    June 2019
    May 2019
    March 2019
    January 2019
    December 2018
    November 2018
    October 2018
    September 2018
    August 2018
    July 2018
    June 2018
    May 2018
    April 2018
    March 2018
    February 2018
    January 2018
    December 2017
    November 2017
    October 2017
    September 2017
    August 2017
    July 2017
    June 2017
    May 2017
    April 2017
    March 2017
    February 2017
    January 2017
    December 2016
    November 2016
    October 2016
    September 2016
    August 2016
    July 2016
    June 2016
    May 2016
    April 2016
    March 2016
    February 2016
    January 2016
    December 2015
    November 2015


Picture
Copyright © 2015
 Vance Martin is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.